Description
SolidCore CoreXY Mechanism Kit with Motor Mount Upgrade
The SolidCore CoreXY Mechanism is a all metal parts kit of the X and Y-axis parts only. No Z-axis parts. So you’ll get the aluminum parts that make up the top of the 3d printer.
All Metal Parts
SolidCore CoreXY Mechanism is a all metal parts kit of the X and Y-axis parts only. No Z-axis parts.
Kit Includes
- 2 x Stealth Motor Mounts
- 2 x XY Idler Mounts
- 2 x X-Carriage w/MGN12 linear rail clamps
- 1 x Y-Carriage
- 1 x E3D – BLTouch Hotend Mount
- 8 x M5 x 35mm Button Head Cap Screw
- 20 x M3 x 6mm Button Head Cap Screw
- 8 x Pulley Spacers
- 16 x Steel Washers
- 24 x Nylon Shim
Ships Within 2 Weeks
Download 3D Models
For More Information See:
Belt Path
A printer’s motors can be offset at different heights so that the belt routing runs a straight belt path and don’t have to be twisted. But this belt routing path would also mean that on one side of the gantry the belt would have the teeth on the side of the idler wheel which wouldn’t run as smooth and could lead to artifacts within printed parts.
Mechanical Arrangement
The crossed belts configuration found on the SolidCore y-axis must be completely perpendicular to each other to prevent any mechanical binding.
Linear Rail: Supported vs Unsupported
A crossbar made from u-shaped aluminum extrusion is used as a support for the linear rails. Depending on the rail length if the y-axis has an unsupported linear rail it could possibly lead to deflection. The load of the belt paths have to be balanced along the running plane with the pulleys. An unbalanced load can lead to the belts trying to slip off the pulleys and premature wear of the bearings.
Linear Rails
The standard SolidCore design uses MGN12 Type H linear rails.
- 20mm x 20mm Hole Pattern
- M3 Threads
Reviews
There are no reviews yet.